Rapid Mixer Granulator R&D Lab Model

Rapid Mixer Granulator R&D Lab Model

 

Rapid Mixer Granulator R&D Model (small RMG machine) including small rapid mixer granulator designed for optimum performance. cGMP complaint with special attention given to clearing Validation. Rapid Mixer Granulator is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity. Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections. All contact parts are made from Stainless Steel 316L or FDA approved materials for cGMP compliance.

 

 

Rapid Mixer Granulator R&D Model Video

Salient Features of Pilot Batch Rapid Mixer Granulator

  • Compact GMP model.
  • All contact parts made from Stainless Steel 316 with Non contact parts made from Stainless Steel 304.
  • MS structure is fully covered with Stainless Steel 304 covers/claddings.
  • All contact parts are mirror polished to 220 Grit and external surfaces to matt finish of 180 Grit.
  • Homogeneous binder distribution.
  • Short batch time and reduce cleaning time.
  • Maximize CIP effectiveness.
  • Air purge sealing system for main stirrer shaft and granulator shaft.
  • All internal contact parts are polished to the mirror finish.
  • PLC based operating panel for precise control of process & automation. (Optional)
  • A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.
  • The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.
  • Granulator motor is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.
  • All moving parts of the machine are totally enclosed to eliminate accident.
  • The machine cannot be started unless and until the mixer cover is properly closed.
  • Flush wall type discharge valve eliminates pockets at the port of discharge valve

 

Technical Specification of Lab Scale RMG Machine

Model

RMG – 10

Specification

Non Flame Proof

Gross Volume

10 Liters approx.

Working Volume

7.5 Liters approx. (3.5 kgs. considering bulk density of 0.5 gm/cc)

Model

GMP

Speed

Chopper Motor: 1400 & 2800

Contact Parts

Stainless Steel 316

Non Contact Parts

Stainless Steel 304

Mounting Structure

MS Covered with Stainless Steel 304

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.

 


Send Inquiry
 

 


Translate »
Adinath