Inverter type Airjet Cleaning Machine or bottle air and vacuum cleaning machine is compact and highly efficient machine with elegant look. This multi featured machine meets the GMP requirements of clean glass and plastic bottles & Jars for non-sterile products like Dry Syrup, Bulk Packing for Tablets & Capsules etc. and found a method of cleaning each individual Bottle/Jar by air jet & vacuum. All contact parts are made from Stainless Steel 316L, or FDA approved materials for cGMP compliance.
This machine works on a principle of back pressure of Bottle which will be fed by the unscramble to reach separator assembly, which transfer the Bottle on conveyor belt and pushes bottle to the cleaning section one after another. Machine consists of two inverters and one cleaning section. Bottle will be pushed by rotating separator towards the in-feed inverter, which makes the Bottle in the wrong direction and push it to cleaning section through back pressure of another Bottle. Cleaning section is equipped with continuous vacuum system. Bottle reaches to the cleaning section, a pair of nozzle starts to flush the air inside the neck of the Bottle and simultaneously vacuum will suck the particle, disturbed by the air. Then Bottle passes to another inverter, where changes the direction to the right direction, further Bottle moves either to the filling machine.
The Airjet Cleaning Machine applies compressed air through jets and also sucks through vacuum. Machine can be used to clean Glass/Plastic/Pet Bottles, Jars etc. Machine is suitable for cleaning of non-sterile products like Dry Syrups and Bulk Packing of Tablets & Capsules.
Machine with Built with Turn Table which feeds container in vertical position through conveyor to cleaning station, where cleaning heads grip the container through cup holder and starts the compressed air and then vacuum to clean the bottles.
Machine finished with stainless steel finish & all contact parts in SS 316 and nylon materials, also having overload clutch system to prevent jamming during the operation. The manifold comprises of inner nozzles which jets compressed air in the bottle and an outer socket, which cover the mouth of the bottle and is connected to an exhaust, ensures perfect cleaning.
INVERTER type AIRJET CLEANING MACHINE VIDEO
Exclusive Features of Inverter type Airjet Vacuum Cleaning Machine
- Compact GMP Model.
- Made from AISI 304 and diverter assembly EDPE.
- Positive air pressure and vacuum cleaning.
- Easy operation for setting, change over& cleaning.
- Stationary S.S. nozzles.
- Automatic loading and unloading of container.
- Individual control for air pressure and vacuum cleaning.
- S.S pressure meter
- High-capacity blower suck the minute particle from bottle, ensure good cleaning of bottles.
- Variable speed with higher output.
- Positive & Negative Air pressure for proper cleaning.
- Easy operation. Stationary nozzles eliminate contamination.
- The stationary nozzles avoid chipping of bottle necks.
- Separate zone for dust collection chamber for easy cleaning after operation.
- Overload clutch is provided to prevent jamming on machine.
- Pressure regulator with pressure switch optionally provided.
- IQ/OQ validation documentation can be provided.
- PLC system with HMI can be offered.
Working Principle of Airjet Cleaning Machine
Containers are fed in upright position on a scrambler and further fed to feed worm, where containers are automatically inverted. The synchronized mechanism feed the container one by one through a chamber which is under negative pressure. A series of nozzles blow air in the container at a high pressure. The dust is collected in dust collector box through exhaust fan. The container is further fed through the synchronized mechanism and feed worm. It is once again upright position and comes out duly cleaned for further operation.
Technical Specification of Bottle Air Jet Cleaning Machine
Model |
AVCM 4 |
AVCM 8 |
Input Specification |
10ml to 1000ml bottles |
10ml to 1000ml bottles |
Production Output |
Up to 50 bottles/minute |
Up to 100 bottles/minute |
Power Supply |
1 H.P. |
2 H.P. |
Electrical Supply |
440 volts, 3 phase, 50 hertz. |
440 volts, 3 phase, 50 hertz. |
Optional Accessories |
Air Filter & Regulator Bottle Inspection Station Bottle Loading Platform |
Air Filter & Regulator Bottle Inspection Station Bottle Loading Platform |
Change Parts |
Nozzles and Mouth holder |
Nozzles and Mouth holder |
Conveyor Height |
875mm to 950mm adjustable |
875mm to 950mm adjustable |
Overall Dimension |
1500mm (L) x 850mm (W) x 1300mm (H) approx. |
2000mm (L) x 850mm (W) x 1300mm (H) approx. |
Compressed Air |
100CFM |
100CFM |
Net Weight |
350 kgs. approx. |
450 kgs. approx. |
Gross Weight |
500 kgs. approx. |
650 kgs. approx. |
* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.
Send Inquiry