Plastic Tube Filling Machine

Plastic Tube Filling Machine (plastic tube filler and sealer) including Plastic tube filling and sealing machine is uses to fill all kinds of semi-viscous and viscous products into soft plastic or flexible compound tubes. This tube filler is an ideal machine for use in the pharmaceutical, chemical, cosmetic, foodstuff and other industries.

Tube filling machines are versatile machines, designed so as to fill viscous and semi viscous products such tube-filling-machine as ointments, cosmetics, toothpastes, adhesives, shaving creams etc. in plastic, laminated and metallic tubes. These machines are competent of handling special tube sizes and are also equipped with ‘No tube no fills’ feature almost similar to the functioning of vial filling machines. There is manual, automatic and high-speed tubes filling machines used in the pharmaceutical industry.

All machines conform to GMP standards. Speedy, simple & proficient changeover is the leading quality of the machines, which helps in responding to the faster-time-to-market era we live in. The optional equipment available with the machines adds to the versatility. We also produce Aluminum Tube Filling Machines.

Plastic Tube Filling Machine Video

Working Principle of Tube Filling Machine

The machine built simple and sturdy with a very compact design to reduce the working area very user friendly.

The machine made of mild steel angle and plates duly painted to smooth finish and outer covered to Stainless Steel covers. The filling area contact parts made of SS 316 Q steel including the hopper. The filling mechanism is mechanically driven with a positive suction pump assembly. Syringe can be provided as per the fill volume of different variants One with each machine. No tube no filling process sensors connected to a pneumatic cylinder which enables filling only when the tube is sensed at the filling area. Machine with pneumatic cut off for accurate filling, mechanical cut off device also available at extra cost.

The heating of the Lami or the plastic tubes is done by a Standard heater which has a capability of attaining max temperature up to 700 deg during constant air flow is on. At the heating section the tube is lifted inside the heater part by which only the area to be sealed is heated without affecting the filled material. The sealing of the Lami and the plastic tube is done in a single station with pneumatic jaws which has provision of holding no in its made pockets. After the sealing the trimming if also done by pneumatic blades to give the tube a smooth finish.

Batch types of numeric 0 to 9 are provided with the machine. Extra types can be bought as extra.

Salient Features of Plastic Tube Filling Machine

• Rotary type compact design.

• Filling Area and hopper made from Stainless Steel 316 quality materials.

• Machine covered with Stainless Steel 304 coverings.

• Suitable for filling from 5gms. to 200gms.

• Higher filling accuracy of ±1%.

• Correct & uniform filling. 

• “No tube – No filling” device.

• Relay electrical control system with operating panel with Start, Stop, Inch button and Speed port.

• S. filling syringe with direct connection to storage tank, hence no wastage of material.

• Variable Motor speed adjustment.

• Batch coding Number (male or female) also available

• Production counter available on control panel to indicate number of tubes filled.

• Lower maintenance requires.

• Automatic tube ejection.

Technical Specification of Plastic Tube Filling Machine

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.