Colloid Mill

Colloid Mill

Colloid Mill including colloidal mill machine uses to reduce the particle size of a solid suspension in a liquid or to reduce the droplet size of a liquid suspended in another liquid. Colloid process done by applying high levels of hydraulic shear to the process liquid. Mill frequently uses to increase the stability of suspensions and emulsions. Colloid Mill uses for wide applications such as homogenizing, emulsifying, dispersing, mixing, superfine grinding, ointments and highly viscous products in pharmaceutical, cosmetics, suspensions & emulsion industry.

The product is fed to the hopper which leads the product into the gap between rotor and stator. The product is subjected to a high degree of shearing, cutting and rubbing between two metal toothed surfaces of rotor and stator and towards the discharge section. The processed product continuously leaves the mill through drainpipe if required, it can be re-circulated by three-way cock and re-circulating pipe assembly. Our range of inline colloid mill includes small colloid mill to industrial colloid mill.

Exclusive Features of Colloid Mill

  • Compact GMP Model.
  • Design is cGMP – Current Good Manufacturing Practices compliance.
  • All Product contact parts AISI 316/ 316L & non-contact parts AISI 304.
  • High speed milling, granulating, pulverizing, mixing and size reduction of wet & dry material.
  • Easy and simple to change knife to impact forward vice-versa by reversible chamber.
  • Dynamic balanced beater assembly bearings are in a separate pillow block at outside chamber.
  • Wide range of sieve of perforated and wire-mesh.
  • Fitted on castor wheels for easy mobility.
  • IQ/OQ documentation can be provided.
  • PLC system with Graphical User Interface can be offered.

 

Working Principle of Colloid Mill

Colloid Mill constructed with a view to process products which is ground & well dispersed. It disintegrates particles faster & uniform swiveling without forming agglomerates and homogenizes products in one pass. Mill develops not only hydraulic pressure in grinding tool section, but turbulence & cavitation’s which combined provide both a gentle grinding & required impact, squeezing, cutting etc. This effects the homogenizing of products & wetting out of powders, all in one shot.

Centrifugal force of the rotor brings the material inside the mill. The rotor & stator combination with its exceptional large surface area provides both a gentle grinding & the required impact effect. A three-way valve at the discharge connection of the Colloid Mill can either provide material to inlet opening for rework or discharge the processed material.


Technical Specification
of Colloid Mill

Model

ACM – 250

ACM -500

ACM-1000

Output – Liter / Hour approx.

150 to 1500

150 to 2500

250 to 5000

Drive type Options

Vertical or Horizontal

Vertical OR Horizontal

Vertical OR Horizontal

Rotor Speed

2800 RPM

2800 RPM

2800 RPM

Hopper Capacity- Liters

15

15

25

Seal Type

Rubber Silicon

Rubber Silicon

Mechanical

Partial Size Reduction- Micron

5 to 10

5 to 10

5 to 10

Electric Motor

3 H. P.

5 H. P.

10 H. P.

* Power voltage can be adjusted as per customer’s domestic power voltage requirements.
* Rights of technical improvements & modification reserved.
* Illustrations & dimensions are shown for information purpose only.

 


Send Inquiry
 

 


Translate »