Ampoule Filling and Sealing Machine

Description

Ampoule Filling and Sealing Machine or ampoule filler machine perform filling sealing built on advanced technology to fulfil the requirement in Pharmaceutical Filling Industry. Ampoules are filed with liquid then purged with nitrogen gas and finally sealed using combustible gases. Machine is having specially designed filling pump for precise filling of liquid with neck centering during filling operation. Ampoule are sealed immediately after filling the liquid in order to avoid contamination. Machine made from high quality stainless steel 316L materials as per cGMP requirements.

Machine having flexibility to fill seal ampoules of 1ml to 25ml capacity. Apart from that, machine has a unique filling capacity of 0.5ml to 25ml in single dosing. Operating on the volumetric piston-pumps type filling principle, the device can fill 10 to 250 ampoules per minute. Another unique advantage of this equipment is the availability of the dead-tray. It offers perfect diversion of the sealed and filled ampoules.

 

The required gases for sealing or filling the ampoules are oxygen and LPG (propane). This state-of-art machine provides optimum flexibility in the preparation of ampoules containing agro-insecticides, veterinary medicines, cosmetic ampoules and several other chemicals.

 

This Adinath range of Filler Sealer is perfect for all kinds of open-mouth glass ampoules.

Salient Features of Ampoule Filling and Sealing Machine

Working Principle of Ampoule Filling and Sealing Machine

Empty ampoules are placed onto hopper of the machine from where it has been dropped to travelling rack in one/two/four/eight by format part. Ampoules advanced to nitrogen purging stations where inert gas needles flush nitrogen. Further ampoules moves to filling unit where filling needles discharge preset volume of liquid into ampoules. Then ampoules stop at post nitrogen unit where again nitrogen get flush inside the ampule. After filling of ampoules it reaches to the sealing unit which is having pre warming and sealing stations. Pre warming station is having less pressure flame which make ampoule warm up to sealing process. Specially designed rollers rotates ampoules at sealing unit for perfect sealing of ampoules all around. Sealing unit perform sealing operation of ampoules. At last ampoules get collected onto collection tray of the machine in upright position for further processing.

The machine performs the following operations:

Working Principle of Ampoule Filling and Sealing Machine

Technical Specification of Ampoule Filling and Sealing Machine

Model AFS-1 AFS-2 AFS-4 AFS-8
No. of Head Single Two Four Eight
Syringes One Double Four Eight
Ampoule Sizes 1 ml to 30 ml 1 ml to 30 ml 1 ml to 10 ml 1 ml to 20 ml
Filling Speed Up to 25 ampoules/minute Up to 50 ampoules/minute Up to 100 ampoules/minute Up to 200 ampoules/minute
Filling Precision ± 1% ± 1% ± 1% ± 1%
Filling Pump Piston Pump Piston Pump Piston Pump Piston Pump
Burner Gas LPG & Oxygen (O₂) LPG & Oxygen (O₂) LPG & Oxygen (O₂) LPG & Oxygen (O₂)
Nitrogen Arrangement Before & After Filling Before & After Filling Before & After Filling Before & After Filling
Number of Fill Nozzles One Two Four Eight
Number of Nitrogen Nozzles Two Four Eight Sixteen
Number of Sealing Burners Two Four Eight Sixteen
Power Required 0.5 H.P. 1 H.P. 1 H.P. 2 H.P.
Power Voltage 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System 230 Volts, Single Phase, 50 Hertz, 4 Wire System
Contact Parts Made from Stainless Steel 316L Made from Stainless Steel 316L Made from Stainless Steel 316L Made from Stainless Steel 316L
Overall Dimension 915mm (L) x 610mm (W) x 965mm (H) approx. 915mm (L) x 760mm (W) x 965mm (H) approx. 1200mm (L) x 1070mm (W) x 965mm (H) approx. 2200mm (L) x 1400mm (W) x 1100mm (H) approx.

Advantages of Ampoule Filling and Sealing Machine

Key Features of Ampoule Filling and Sealing Machine

  • Compact cGMP Design
    Built as a compact monoblock unit meeting current Good Manufacturing Practices (cGMP). Contact parts are SS 316L and non-contact parts are SS 304 for hygiene, durability, and easy cleaning.

 

  • “No Ampoule – No Filling” System
    Sensors detect the absence of an ampoule and stop the filling action. This prevents product wastage, spillage, and contamination while improving safety and efficiency.

 

  • Nitrogen Gas Flushing
    Supports pre-filling, during-filling, and post-filling nitrogen purging. It displaces air/oxygen to protect sensitive formulations and maintain sterility and product integrity.

 

  • Ampoule Neck Centering & Pre-Warming
    Precise neck centering ensures accurate gas flushing and filling. A pre-warming station prepares the glass for uniform, reliable flame sealing and reduces breakage.

 

  • High Filling Accuracy & Versatile Range
    Volumetric piston (or optional servo/peristaltic) pumps deliver ±1% accuracy. Suitable for 1 ml to 20/30 ml open-mouth glass ampoules with minimal change parts.

 

  • Flame Sealing with Flow Meters
    Uses LPG + oxygen burners with adjustable flow meters for consistent, hermetic tip sealing. Waste glass tips are automatically clipped and ejected.

 

  • Easy Maintenance & Quick Changeover
    Full accessibility, tool-free or minimal-tool size changeovers, and low maintenance design. Available in single to multi-head models (outputs typically 25–200+ ampoules/min depending on configuration).

FAQ for Ampoule Filling and Sealing Machine

Four main models are offered:

  • AFS-1 (Single Head): Up to 25 ampoules/minute
  • AFS-2 (Two Head): Up to 50 ampoules/minute
  • AFS-4 (Four Head): Up to 100 ampoules/minute
  • AFS-8 (Eight Head): Up to 200 ampoules/minute

Empty ampoules are loaded via hopper onto a travelling rack. They undergo pre-nitrogen purging, volumetric liquid filling, post-nitrogen flushing, pre-warming, and flame sealing (with ampoule neck rotation for uniform seals). Waste tips are clipped and ejected, and finished ampoules are collected upright on a dead tray.

It is a compact cGMP monobloc design with SS 316L contact parts. Features include nitrogen flushing before and after filling, “No Ampoule – No Filling” system, pre-warming station, tool-free format changeovers, delicate ampoule rotating unit, waste tip collector, and optional PLC/HMI or laminar airflow for sterile (Class 100) filling.

It is designed for pharmaceutical, biotech, biochemical, cosmetic, veterinary, and chemical industries. It handles open-mouth glass ampoules (Type B and C) for injectables, agro-insecticides, veterinary medicines, cosmetics, and other liquid chemicals requiring sterile, hermetic sealing with LPG + oxygen flames.

It operates on 230 Volts, single-phase, 50 Hz (4-wire system; voltage adjustable as needed). Power ranges from 0.5 H.P. (AFS-1) to 2 H.P. (AFS-8). Dimensions vary by model (e.g., AFS-1 approx. 915 × 610 × 965 mm; AFS-8 approx. 2200 × 1400 × 1100 mm). Sealing uses LPG & Oxygen burners with nitrogen arrangement before and after filling.

Yes — Adinath International Ampoule Filling and Sealing Machine complies to cGMP, MHRA, FDA and WHO-GMP standards, with optional CE marked equipments and 21 CFR Part 11 software compliance for the HMI/PLC. Machine contact parts having Stainless Steel 316L grade materials with validation documents having IQ, OQ, DQ validation protocols as optional. Organization is ISO 9001:2015 certified.

Manufacturing lead time is generally 7 to 14 weeks from order confirmation. Further it takes 2 to 8 weeks for international shipping depending upon destination. Order can be expediate sooner or later as per specific buying requirements. Destination specific certifications like US FDA, EU, ANVISA, SFDA. CE can add 3 to 6 weeks additionally.

Yes, Adinath International Ampoule Filling and Sealing Machine export this machine to more than 48 countries of this world including America, Europe, Asia, Middle East, Africa, CIS and Australia sub continents. Please visit our clientele page for complete list of our customers worldwide. See the turnkey project page for our complete plant offerings.

Service of skilled engineers and technicians provided for technical support of supplied equipments. Installations, commissioning, training and IQ, OQ, DQ validations performed by qualified engineers. Remote support through video call, phone, email and other modes provided for international installations. Spare parts of Ampoule Filling and Sealing Machine stocked at our premises in Ahmedabad and shipped immediately after ordering. Standard 12 months manufacturing warranty included with supplied equipment.

Ampoule Filling Machine of One, Two head, Four Head, Six Head and Eight head. Ampoule Filler Machine uses in Injectables which are Two Head Ampoule Filling Machine, Four Head Ampoule Filling Machine, Six Head Ampoule Filling Machine, Eight Head Ampoule Filling Machine and Lab Scale Ampoule Filling Machines. Option of Safety Cabinet/Laminar Air Flow/ISOLATOR available as per individual requirements. Our ampoule filling machine can be categorized in below sections

 

  • Ampoule Filling Machine
  • Automatic Ampoule Filler
  • Automatic Ampoule Filling Machine
  • Single Head Ampoule Filling Machine
  • Four Head Ampoule Filling Machine
  • Two Head Ampoule Filling Machine
  • High Speed Ampoule Filling Machine
  • Eight Head Ampoule Filling Machine
  • Onion Skin Ampoule Filling Machine
  • Cosmetic Ampoule Filling Machine
  • Glass Ampoule Filling Machine
  • Ampoule Filling And Sealing Machine
  • Ampoule Filling & Sealing Machine

 

Many our different models of Ampoule Filling Machine suitable as per need of small, medium & large volume sterile injectable preparations.

 

Single Head Ampoule Filling & Sealing Machine having output of 1500 ampoules/hour suitable for lab scale production.

 

Four Head Ampoule Filling & Sealing Machine having output of 6000 ampoules/hour suitable for medium scale production.

 

High Speed Ampoule Filling Machine having output of 12000 ampoules/hour suitable for large scale production.

 

We provide integrated Ampoule Filling Line which is having Ampoule Washing, Sterilization Tunnel, High Speed Ampoule Filling Machine and Ampoule Sticker Labeling Machine. These production lines available in capacity of 200 ampoules/minute and 300 ampoules/minute production range.

 

Our Ampoule Filling Machine suitable for filling 1ml, 2ml, 3ml, 5ml, 10ml, 20ml, 25ml and 30ml ampoule sizes. We manufacture injectable plant machineries which includes Ampoule Vial Washing Machine, Ampoule Filling and Sealing Machine, Ampoule Filler Machine, Ampoule Inspection Machine, Ampoule  Sticker Labeling Machine.  Apart from it we manufacture Vial Liquid Filling Machine, Vial Powder Filling Machine, Injectable Powder Filling Machine, Vial Cap Sealing Machine, Vial Labelling Machine and Dry Syrup Powder Filling Machines.

Talk to Our Engineers

Partner with Industry Experts

Connect with our engineering team to discuss your specific production requirements. We provide customized, cGMP-compliant machinery solutions designed to optimize your manufacturing facility and maximize output.

Established in 1998, Adinath International is a leading pharmaceutical machinery manufacturer in India. We deliver cGMP and FDA-compliant processing, filling, and packaging solutions globally. From liquid filling to tablet presses, our sturdy, cost-effective, and hygienic machines serve the pharma, biotech, food, and cosmetic industries worldwide.

Contact Info

©2026 Adinath International | Theme Developed By Pharma Machinery Manufacturer | Website updated on: 06 November 2026