Vial Powder Filling Machine or vial powder filler is filling device for filling injection powder vials. Sterile Powder Filler is the monoblock equipment perform filling and stoppering/bunging operations on same platform. All contact parts are made from Stainless Steel 316L, or FDA approved materials for cGMP compliance.
Our Injectable Powder Filler is available in Single Powder Wheel and Double Powder Wheel models, delivering production outputs from 60 VPM to 200 VPM. These advanced powder filling machines feature an optional servo-driven system for precise powder wheel positioning and consistent performance.
The vacuum-driven powder wheel incorporates a special design that ensures superior filling accuracy, minimal product wastage, and reliable dosing for pharmaceutical injectable powders.
Ideal for sterile vial packaging lines, this high-speed Injectable Powder Filler integrates seamlessly into complete automatic vial powder filling systems. We also manufacture compatible Vial Cap Sealing Machines and Vial Labeling Machines, enabling a fully automatic Vial Powder Filling Line from powder dosing to final sealing and labeling. Designed for efficiency, hygiene, and regulatory compliance, our powder fillers help pharmaceutical manufacturers achieve higher productivity and precise fill weights. Contact us today for customized Injectable Powder Filling solutions tailored to your production needs.
The sterilized powder is stored in powder hopper is agitated by pair of mechanical agitators for maintaining consistency and uniform bulk density. The powder wheel having twelve ports which rotates at pre-determined speed below the powder hopper with practically no clearance. Powder wheel consist of Piston in each port and behind the powder wheel vacuum plate is provided. There is no clearance between powder wheel and vacuum plate due to back spring pressure. Precise volume of powder is sucked into the port of powder wheel during vacuum; according to the piston length different fill size can be achieved. The excess powder is doctored off by a doctor blade. Doctor blades can be adjusted from outside also without removing powder hopper. When powder wheel indexes further and remain in the port due to the vacuum till it reaches just vertically above the container. The time dose of Compressed air (Nitrogen Gas), sterilized low pressure air sequentially flushes out powder from the port of powder wheel in to the container one by one.
The filled containers are immediately separated on the conveyor by vial separator and moves further for stoppering operation.
The sterilized, siliconised, rubber stoppers stored in the vibrator bowl moves to vibratory bowl and stacked vertically in the rubber stopper chute. The container is hold firmly between pair or timing belt to pickup rubber stopper from exit end of the chute. Further container is passed between two pressing roller for tight fit fixing of rubber stoppers.
| Models | APF 12S | APF 12D |
| Production Output | Up to 100 vials/minute | Up to 200 vials/minute |
| Fill Volume | 50 mg. to 10 grams | 50 mg. to 10 grams |
| Vial Size | 5ml to 250ml | 5ml to 250ml |
| Filling Accuracy | ± 2 – 3% in single dosing depending upon consistency and uniformity of bulk density of Injectable Powder | ± 2 – 3% in single dosing depending upon consistency and uniformity of bulk density of Injectable Powder |
| Power Load | 3.5 H. P. | 4.5 H. P. |
| Overall Dimension | 2600mm (L) X 1100mm (W) X 1800mm (H) approx. | 3000mm (L) X 1100mm (W) X 1800mm (H) approx. |
| Net Weight | 500 kgs. approx. | 700 kgs. approx. |
| Gross Weight | 750 kgs. approx. | 950 kgs. approx. |
It handles fill volumes from 50 mg to 10 grams (with multiple dosing via change parts for larger amounts). Suitable vial sizes range from 5 ml to 250 ml.
Two main models are offered:
Sterilized powder is stored in a hopper and agitated for uniform bulk density. A vacuum-driven powder wheel with ports and pistons rotates beneath the hopper, drawing precise powder volumes via vacuum. Excess powder is removed by an adjustable doctor blade. The wheel then indexes over the vial, and a short burst of sterilized low-pressure air or nitrogen flushes the powder into the container. Filled vials are immediately separated and proceed to the built-in rubber stoppering station, where sterilized stoppers are applied via a vibratory bowl and chute, then pressed for a secure fit.
Filling accuracy is typically ±2% to ±3% (depending on powder characteristics, consistency, bulk density, and environmental conditions). All product-contact parts are made of Stainless Steel 316L (or FDA-approved materials) for easy removal, autoclaving/sterilization, and cGMP compliance. The frame is constructed for hygienic, cleanroom-friendly operation.
Key features include a compact cGMP model design; servo-driven powder wheel rotation and vial transport; vacuum-driven specially designed powder wheels; built-in rubber stoppering system; tool-less adjustment of doctor and wiper blades; multiple dosing via change parts; independent-drive infeed/outfeed turntables; safety clutch for vial breakage protection; optional PLC with graphical user interface; optional inbuilt laminar airflow for Class 100 sterile filling; and availability of IQ/OQ documentation, sampling, and rejection systems.
Advantages include high volumetric accuracy (typically ±1–2%), production speeds of 30–200+ vials per minute, “No Vial, No Filling” protection to minimize powder wastage, reduced contamination risk through aseptic/sterile design, minimal human intervention, and compact cGMP-compliant construction that saves cleanroom space. It is ideal for the pharmaceutical, biotech, nutraceutical, herbal, Ayurvedic, and cosmetic industries—particularly for sterile injectable powder packaging lines that can integrate with vial capping and labeling machines.
Yes — Adinath International Vial Powder Filling Machine complies to cGMP, MHRA, FDA and WHO-GMP standards, with optional CE marked equipments and 21 CFR Part 11 software compliance for the HMI/PLC. Machine contact parts having Stainless Steel 316L grade materials with validation documents having IQ, OQ, DQ validation protocols as optional. Organization is ISO 9001:2015 certified.
Manufacturing lead time is generally 7 to 14 weeks from order confirmation. Further it takes 2 to 8 weeks for international shipping depending upon destination. Order can be expediate sooner or later as per specific buying requirements. Destination specific certifications like US FDA, EU, ANVISA, SFDA. CE can add 3 to 6 weeks additionally.
Yes, Adinath International Vial Powder Filling Machine export this machine to more than 48 countries of this world including America, Europe, Asia, Middle East, Africa, CIS and Australia sub continents. Please visit our clientele page for complete list of our customers worldwide. See the turnkey project page for our complete plant offerings.
Service of skilled engineers and technicians provided for technical support of supplied equipments. Installations, commissioning, training and IQ, OQ, DQ validations performed by qualified engineers. Remote support through video call, phone, email and other modes provided for international installations. Spare parts of Vial Powder Filling Machine stocked at our premises in Ahmedabad and shipped immediately after ordering. Standard 12 months manufacturing warranty included with supplied equipment.
Select your country for local regulatory, power supply and shipping details.
Europe
Asia-Pacific
Africa
North & Central America
Middle East
Talk to Our Engineers
Connect with our engineering team to discuss your specific production requirements. We provide customized, cGMP-compliant machinery solutions designed to optimize your manufacturing facility and maximize output.
Established in 1998, Adinath International is a leading pharmaceutical machinery manufacturer in India. We deliver cGMP and FDA-compliant processing, filling, and packaging solutions globally. From liquid filling to tablet presses, our sturdy, cost-effective, and hygienic machines serve the pharma, biotech, food, and cosmetic industries worldwide.
©2026 Adinath International | Theme Developed By Pharma Machinery Manufacturer | Website updated on: 06 November 2026
Get a Quote
Share the product, output and packaging you need. Our engineering team will review it and come back to you with a tailored proposal.
Fill in your details and we will get in touch shortly.